2010 BMW 128 Owner's Manual - Page 36
2010 BMW 128 Manual
Page 36 highlights
Opening and closing consumers are switched off before locking the vehicle.< Malfunctions Comfort Access may malfunction due to local radio waves. If this happens, open and close the vehicle via the buttons on the remote control or using the integrated key. To start the engine afterward, insert the remote control into the ignition lock. Coupe: Convenient closing For Convenient closing, keep your finger on the surface, arrow 2. Convertible: window and convertible top operation With the ignition at radio readiness or beyond, you can open and close the windows and the convertible top when a remote control is located inside the vehicle. Warning lamps The warning lamp in the instrument cluster lights up when you attempt to start the engine: the engine cannot be started. The remote control is not inside the vehicle or is malfunctioning. Take the remote control with you inside the vehicle or have it checked. If necessary, insert another remote control into the ignition lock. The warning lamp in the instrument cluster lights up while the engine is running: the remote control is no longer inside the vehicle. After the engine is switched off, the engine can only be restarted within approx. 10 seconds. The indicator lamp in the instrument cluster comes on and a message appears on the Control Display: replace the battery in the remote control. Unlocking the trunk lid separately Press the button on the outside of the trunk lid. This corresponds to pressing the button. If the vehicle detects that a remote control has been accidentally left inside the locked vehicle after the trunk lid is closed, the lid will reopen. The hazard warning flashers flash and a signal* sounds.< Switching on radio readiness Radio readiness is switched on by pressing the start/stop button, refer to page 55. Do not depress the brake or the clutch; otherwise, the engine will start immediately.< Replacing the battery The remote control for Comfort Access contains a battery that will need to be replaced from time to time. 1. Take the integrated key out of the remote control, refer to page 26. Starting the engine You can start the engine or switch on the ignition when a remote control is inside the vehicle. It is not necessary to insert a remote control into the ignition lock, refer to page 55. Switching off the engine in cars with automatic transmission The engine can only be switched off when the selector lever is in position P, refer to page 56. To switch the engine off when the selector lever is in position N, the remote control must be in the ignition lock. 2. Remove the cover. 3. Insert the new battery with the plus side facing up. 34 Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG