2010 BMW 135 Owner's Manual - Page 214

2010 BMW 135 Manual

Page 214 highlights

Replacing components 3 4 5 6 7 8 Lateral reflector Roadside parking lamp and tail lamp LED Reflector Turn signal Backup lamp Brake Force Display lamp Inner brake lamp, turn signal, backup lamp and Brake Force Display lamp Replacing tail lamps Outer brake lamp The bulbs are integrated in a single bulb holder. 1. Remove the cover from the panel of the cargo area. 2. Detach the bulb holder by pressing together the clips, see arrows, and remove it. 3. Brake lamps and turn signal: apply gentle pressure to the bulb while turning it to the left for removal and replacement. 4. Backup lamp: pull the bulb out of the socket and replace it. 5. Attach the bulb holder and let it snap into place. 6. Reattach the cover. The outer brake lamp can be accessed through a single socket. The figure shows the right side of the vehicle. 1. Remove the cover from the panel of the cargo area. 2. Turn the bulb holder to the left, see arrow, and remove it. 3. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. 4. Attach the bulb holder and turn it all the way in the opposite direction. 5. Reattach the cover. The roadside parking lamp/tail lamp uses LED design. After replacing the bulb, ensure that the bulb holder is properly seated; otherwise, the roadside parking lamp/tail lamp may not work.< License plate lamps and center brake lamp These lamps use LED technology for operation. In the event of a malfunction, please contact your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Changing wheels Your BMW is equipped with run-flat tires as standard. This removes the need to change a wheel immediately in the event of a puncture. For information on continuing to drive with a damaged tire, refer to Indication of a flat tire on page 78. The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall, refer to Run-flat tires, page 196. 212 Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Replacing components
212
3
Lateral reflector
4
Roadside parking lamp and tail lamp LED
5
Reflector
6
Turn signal
7
Backup lamp
8
Brake Force Display lamp
Replacing tail lamps
Outer brake lamp
The outer brake lamp can be accessed through
a single socket.
The figure shows the right side of the vehicle.
1.
Remove the cover from the panel of the
cargo area.
2.
Turn the bulb holder to the left, see arrow,
and remove it.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
4.
Attach the bulb holder and turn it all the way
in the opposite direction.
5.
Reattach the cover.
The roadside parking lamp/tail lamp uses
LED design. After replacing the bulb,
ensure that the bulb holder is properly seated;
otherwise, the roadside parking lamp/tail lamp
may not work.
<
Inner brake lamp, turn signal, backup
lamp and Brake Force Display lamp
The bulbs are integrated in a single bulb holder.
1.
Remove the cover from the panel of the
cargo area.
2.
Detach the bulb holder by pressing
together the clips, see arrows, and remove
it.
3.
Brake lamps and turn signal: apply gentle
pressure to the bulb while turning it to the
left for removal and replacement.
4.
Backup lamp: pull the bulb out of the socket
and replace it.
5.
Attach the bulb holder and let it snap into
place.
6.
Reattach the cover.
License plate lamps and center brake
lamp
These lamps use LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with run-flat tires as
standard. This removes the need to change a
wheel immediately in the event of a puncture.
For information on continuing to drive with a
damaged tire, refer to Indication of a flat tire on
page
78
.
The symbol identifying run-flat tires is a circle
with the letters RSC on the sidewall, refer to
Run-flat tires, page
196
.
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG