2010 BMW 135 Owner's Manual - Page 62

Driving Unusually rapid flashing of the indicator lamp and the turn signals indicates that one of the turn signal bulbs has failed.< 5 Setting speed for intermittent wipe, or sensitivity of the rain sensor Switching on wipers Indicating a turn briefly Press the lever as far as the resistance point for as long as you wish to indicate a turn. Press the lever upward, arrow 1. The lever automatically returns to its initial position when released. Triple turn signal activation Press the lever as far as the resistance point. The turn signals flash three times. You can activate or deactivate this function. 1. "Settings" 2. "Lighting" 3. "Triple turn signal" Normal wiper speed Press once. The system switches to operation in the intermittent mode when the vehicle is stationary. Fast wiper speed Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary. Intermittent wipe or rain sensor* If the car is not equipped with a rain sensor, the intermittent-wipe time is a preset. If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror. Triple turn signal activation is activated and is stored for the remote control currently in use. Wiper system Activating intermittent wipe or rain sensor 1 2 3 4 Switching on wipers Switching off wipers or brief wipe Activating/deactivating intermittent wipe or rain sensor* Cleaning windshield and headlamps* Press the button, arrow 3. The LED in the button lights up. Setting speed for intermittent wipe or sensitivity of the rain sensor Turn the thumb wheel 5. 60 Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG