2010 BMW 135 Owner's Manual - Page 43

Take the Allen wrench out of the onboard literature pouch. 8. Attach the handle of the screwdriver to the Allen wrench and insert the wrench into the opening provided. 2. Press together the top and bottom parts of the wind deflector until the catch engages, arrow 2. 3. Position both locking pins of one side at the openings provided for them. The closing procedure must be fully completed; otherwise, injury or damage may occur.< Please contact your BMW center to have the cause of the malfunction eliminated. Wind deflector* The wind deflector keeps air currents in the passenger compartment at a low level when the convertible top is down and provides for an even more pleasant journey at higher speeds. Installation 1. Remove the wind deflector from the protective cover and unfold it, arrows 1. 6. Fold up the top section of the wind deflector, arrow 6. With the wind deflector installed: do not recline the front-seat backrests too far if the seat is to be slid all the way back, as this would damage the wind deflector.< Proceed in the reverse order as used for installation. 41 Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG Reference Mobility Removing the wind deflector Communications Entertainment Navigation 9. Turn the Allen wrench all the way to the left, arrow 7, until the front convertible top frame is locked to the windshield frame. The rear convertible top frame is automatically pressed down onto the convertible top box cover and is sealed tight under tension. 4. Press the wind deflector into the openings, arrows 3, overcoming the tension in the springs, and push the free locking pin in the same direction, arrow 4. 5. Position the free locking pins at the corresponding openings and let the spring tension lock the wind deflector in place, arrow 5. Driving tips Controls At a glance