2010 Cadillac Escalade Owner's Manual - Page 282

STOP c: Press once to stop playing a DVD. There is a pre-stop feature for DVD and video CD only. This feature resumes playback of the disc where it was stopped. Press the stop button once during disc playback and c displays on the DVD startup screen. This icon disappears after a few seconds. Press the stop button a second time, or eject the disc, to cancel the pre-stop feature and to clear the disc position memory. SOURCE: Press to select between Monitor 3, Monitor 4, or the AV INPUT. Each video display screen can be adjusted independently, as well as display information from both DVD players and both A/V inputs. Infrared Remote Sensor: Located in the top center of the video display screen. Do not block the signal from the remote to the sensor. Infrared Transmitters: Located in the top center of the video display screen. Do not block the signal from the headphones to the transmitter. Video Display Screen: Located on the back of each headrest. AV OUTPUT (Audio/Video Output Jack): Located on the lower left side of the screen and is identified on the video screen panel as the AV OUTPUT. Headphone Jack : Wired headphones can be plugged into the headphone jack with one-eighth inch stereo plugs. AV INPUT: (Audio/Video Input Jack): The audio/video input jack is located below the video display screen and allows viewing of auxiliary sources such as portable DVD players, game stations, or video cameras, on each screen. . Video Input - The yellow connector is used for video input. L Audio - The white connector is used for the left side audio. R Audio - The red connector is used for the right side audio. . . Level Lock and Release Latch: The viewing angle of the video screen can be adjusted by releasing the latch and gently moving the screen. Then lock it into a secure position. 4-90