2010 Cadillac Escalade Owner's Manual - Page 504

7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If you do not line up the pins correctly, you will not be able install the taillamp assembly properly. If you need to replace the taillamp, stoplamp, or turn signal, you will need to see your dealer for service. 2. Twist and pull the license plate lamp forward through the molding opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. License Plate Lamp Replacement Bulbs Exterior Lamp Back-up Lamp License Plate Lamp Bulb Number 7440 W5W For replacement bulbs not listed here, contact your dealer. 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 7-56