2013 Cadillac ATS Owner Manual - Page 115

Instruments and Controls INT (Rainsense Wipe Sensitivity Control): Move the windshield wiper lever to INT. Turn the x INT band on the wiper lever to adjust the sensitivity. With Rainsense, if the transmission is in N (Neutral) and the vehicle speed is very slow, the wipers will automatically stop at the base of the windshield. The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased. Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on page 10‑23 for information on filling the windshield washer fluid reservoir. 5-5 { WARNING In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. n L (Windshield Washer): Compass The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak®, and vehicle speed information. . Turn the band up for more sensitivity to moisture. Turn the band down for less sensitivity to moisture. Move the windshield wiper lever out of the INT position to deactivate Rainsense. . . Wiper Arm Assembly Protection When using an automatic car wash, move the windshield wiper lever to OFF. This disables the automatic Rainsense windshield wipers.