2013 Cadillac ATS Owner Manual - Page 244

9-26 Driving and Operating D (Drive): This position is for normal driving. It provides the best fuel economy. If you need more power for passing, and you are: . N (Neutral): In this position, the engine does not connect with the wheels. To restart when the vehicle is already moving, use N (Neutral) only. You can also use N (Neutral) when the vehicle is being towed. Manual Mode Driver Shift Control (DSC) Notice: Driving with the engine at a high rpm without upshifting while using Driver Shift Control (DSC), could damage the vehicle. Always upshift when necessary while using DSC. { WARNING Shifting into a drive gear while the engine is running at high speed is dangerous. Unless your foot is firmly on the brake pedal, the vehicle could move very rapidly. You could lose control and hit people or objects. Do not shift into a drive gear while the engine is running at high speed. Notice: Shifting out of P (Park) or N (Neutral) with the engine running at high speed may damage the transmission. The repairs would not be covered by the vehicle warranty. Be sure the engine is not running at high speed when shifting the vehicle. Going less than 55 km/h (35 mph), push the accelerator pedal about halfway down. Going about 55 km/h (35 mph) or more, push the accelerator all the way down. The transmission will shift down to a lower gear and have more power. . Downshifting the transmission in slippery road conditions could result in skidding; see "Skidding" under Loss of Control on page 9‑5. Notice: Spinning the tires or holding the vehicle in one place on a hill using only the accelerator pedal may damage the transmission. If you are stuck, do not spin the tires. When stopping on a hill, use the brakes to hold the vehicle in place. Vehicles with DSC may either use the shift lever or the tap shift controls on the back of the steering wheel (if equipped) to manually shift the automatic transmission.