2013 Cadillac ATS Owner Manual - Page 195

Infotainment System 7-23 Bluetooth (Infotainment Controls) For information about how to navigate the menu system using the infotainment controls, see Overview on page 7‑3. Pairing Information . Pairing a Phone or Device 1. From the Home Page, turn the MENU knob to access the PHONE screen button, then press the MENU knob to select the PHONE screen button. If a device has been previously paired, the main Phone menu will be shown. If no devices have been paired, Step two can be skipped. 2. Turn the MENU knob and press to select Manage Phones. 3. Press the area just above the chrome bar and below the PAIR screen button. A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used in Step 5. 4. Start the pairing process on the cell phone to be paired to the vehicle. See the cell phone manufacturer's user guide for information on this process. Up to five cell phones can be paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving. Pairing only needs to be completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were newly paired to the system. To link to a different paired phone, see "Connecting to a Different Phone" after in this section. . . Switching to Handset or Handsfree Mode To switch between handset mode, use the OnStar command, "transfer call." . Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls can be made using OnStar Hands-Free Calling, if available. SeeOnStar Overview on page 14‑1. .