2013 Cadillac Escalade ESV Owner Manual - Page 399

Vehicle Care notice that the beam is a slightly different shade than it was originally. This is normal. 10-31 LED Lighting This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer. 6. Press a new bulb into the socket, insert the socket into the taillamp assembly and turn the socket clockwise into the taillamp assembly. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If the pins do not line up correctly, the taillamp assembly will not be able to be installed properly. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the inner pins on the taillamp assembly disengage from the vehicle. 4. Turn the socket counterclockwise to remove it from the taillamp assembly. 5. Pull the old bulb straight out from the socket. If the taillamp, stoplamp, or turn signal need to be replaced, see your dealer for service. Back-Up Lamps To replace this bulb: 1. Open the liftgate. See Liftgate on page 2‑8 for more information.