2014 Cadillac SRX Owner Manual - Page 290

10-30 Vehicle Care 4. Install the bulb socket in the headlamp assembly. 5. For the driver side, reinstall the underhood electrical center cover by latching three clips. 6. For the passenger side, reinstall the air filter/cleaner assembly base by pushing to seat. Verify the base is seated securely, then install the engine air filter/ cleaner assembly. Turn Signal Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-13. 2. Remove the push pin (1) on the taillamp cover (2). 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten the snap tabs. 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove.