2014 Cadillac SRX Owner Manual - Page 291

Vehicle Care 11. Push the push pin to secure the taillamp cover. 10-31 Back-Up Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-13. 6. Turn the turn signal lamp bulb socket counterclockwise to remove it from the taillamp assembly. 7. Pull the bulb straight out from the socket. 8. Press a new bulb into the socket, insert it into the taillamp assembly, and turn the bulb socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws. 10. Reinstall the taillamp cover by snapping it into place. 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove. 2. Remove the push pin (1) on the taillamp cover (2). 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten from the snap tabs.