2014 Cadillac SRX Owner Manual - Page 292

10-32 Vehicle Care 11. Push the push pin to secure the taillamp cover. License Plate Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-13. 6. Disconnect the wiring harness connector from the back-up bulb/ socket assembly. 7. Turn the back-up bulb socket counterclockwise to remove it from the taillamp assembly. 8. Install a new bulb/socket assembly into the taillamp assembly, and turn the bulb/ socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws. 10. Reinstall the taillamp cover by snapping it into place. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly toward the right. 3. Turn the lamp assembly down to remove it from the liftgate. 4. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into the lamp assembly. 7. Turn the lamp assembly into the liftgate, engaging the clip side first.