2014 Cadillac SRX Owner Manual - Page 35

Keys, Doors, and Windows 3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1. passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket. 5. Press the ENGINE START/ STOP button. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode. 2-7 WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time. To start the vehicle: 1. Open the center console storage area and the storage tray. Starting the Vehicle with a Low Transmitter Battery 4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front When the vehicle is started, if the transmitter battery is weak, the DIC may display NO REMOTE DETECTED or NO REMOTE KEY 2. Place the transmitter in the transmitter pocket.