1999 Chevrolet Camaro Owner's Manual - Page 104
1999 Chevrolet Camaro Manual
Page 104 highlights
yellowblue Setting Cruise Control Resuming a Set Speed Suppose you set your cruise control at a desired speed and then apply the brake or clutch pedal. This, of course, shuts off the cruise control. But you don't need to reset it. Once you're going about 25 mph (40 km/h) or more, you can move the cruise control switch from ON to R/A (Resume/Accelerate) for about half a second. You'll go right back up to your chosen speed and stay there. Increasing Speed While Using Cruise Control There are three ways to go to a higher speed: CAUTION: If you leave your cruise control switch on when you're not using cruise, you might hit a button and go into cruise when you don't want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use it. 1. Move the cruise control switch to ON. 2. Get up to the speed you want. 3. Push in the SET button at the end of the lever and release it. 4. Take your foot off the accelerator pedal. D Use the accelerator pedal to get to the higher speed. Push the set button at the end of the lever, then release the button and the accelerator pedal. You'll now cruise at the higher speed. briefly move the switch to R/A and then release it. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) faster. there until you get up to the speed you want, and then release the switch. D To increase your speed in very small amounts, D Move the cruise switch from ON to R/A. Hold it 2-48