1999 Chevrolet Camaro Owner's Manual - Page 77

yellowblue Mode 1: All Off (No horn chirps or parking lamp flash). Mode 2: Horn and Lamps (Your parking lamps will flash and your horn will chirp twice to verify the system is armed using any arming method). Mode 3: Horn and Lamps/Lamps (If you use the remote keyless entry transmitter to arm the system, your parking lamps will flash and your horn will chirp twice to verify that the system is armed. If it only chirps once, the hatch is open or unlatched. If you use either the power door lock switch or passive arming, only your lamps will flash for verification). Mode 4: Lamps (When your vehicle arms, only your parking lamps will flash for verification). Theft-Deterrent Arming Method Your vehicle comes with this feature set in Mode 3. To change the factory setting, do the following: 1. Press the UNLOCK switch on the door. 2. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set for. 3. Press the UNLOCK switch on the door until you hear the number of chimes that correspond to the mode selection you want. Mode 1: Alarm System Off (The system will not arm). Mode 2: Remote Keyless Entry Transmitter Lock (When you lock your doors using the remote keyless entry transmitter, the system will arm itself). Mode 3: Remote Keyless Entry Transmitter/Power Door Lock Switch (If you use either the remote keyless entry transmitter or the power door lock switch to lock the doors, the system will arm itself). Mode 4: Passive arming and Remote Keyless Entry Transmitter/Power Door Lock Switch Arming (The system will arm itself after all doors are closed, plus arming per mode 3). Driver's Door Alarm Delay and Shock Sensor Enable Your vehicle comes with this feature set in Mode 4. To change the factory setting, do the following: 1. Turn the parking lamps on and off. 2. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set for. 3. Turn the parking lamps on and off until you hear the number of chimes that corresponds to the mode selection you want. 2-21