2005 Chevrolet Cobalt Owner's Manual - Page 80
2005 Chevrolet Cobalt Manual
Page 80 highlights
Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: Ignition Positions With the key in the ignition switch, you can turn it to four different positions. • Do not drive at any one speed, fast or slow, for the first 500 miles (805 km). Do not make full-throttle starts. • Avoid making hard stops for the first 200 miles (322 km) or so. During this time your new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key. Use the correct key and turn the key only with your hand. Make sure the key is all the way in. If it is, turn the steering wheel left and right while you turn the key hard. If none of this works, then your vehicle needs service. • Do not tow a trailer during break-in. See Towing a Trailer (Manual Transaxle) on page 4-37 or Towing a Trailer (Automatic Transaxle) on page 4-38 for more information. 9(LOCK): This position locks your steering column. It is a theft-deterrent feature. You will only be able to remove your key when the ignition is turned to LOCK. If you have an automatic transaxle, the ignition switch cannot be turned to LOCK unless the shift lever is in PARK (P). 2-16