2005 Chevrolet Cobalt Owner's Manual - Page 81

Shift Lock Release {CAUTION: If you have a manual transaxle removing the key from the ignition switch will lock the steering column and result in a loss of ability to steer the vehicle. This could cause a collision. If you need to turn the engine off while the vehicle is moving, turn the key to ACC. ACC (ACCESSORY): This position operates some of your electrical accessories. It unlocks the steering wheel and ignition. The following procedure allows the ignition to be turned to LOCK and for ignition key removal in case of a dead battery or low voltage battery. 1. Make sure the shift lever is in PARK (P). R (RUN): This is the position the switch returns to after you start your engine and release the switch. The switch stays in the RUN position when the engine is running. But even when the ignition is not running, you can use RUN to operate your electrical accessories and to display some warning and indicator lights. / (START): This position starts the engine. When the engine starts, release the key. The ignition switch will return to RUN for normal driving. A warning tone will sound if you open the driver's door when the key has not been removed from the ignition. 2. Using a tool, pry off the cover from the bottom of the steering column. 2-17