2005 Chevrolet Malibu Owner's Manual - Page 345

3. With the valve stem up, place the tire on the compartment floor with the rear of the tire beneath the trim panel. The tire may not lay completely flat. Line up a wheel nut hole with the bolt. 4. With the yellow cap in place to prevent the wheel from being scratched, screw the bolt extension onto the bolt through the wheel nut hole. 5. Remove the plug from the center hole of the floor cover by pressing on the tabs on the bottom of the cover. Remove the yellow cap from the bolt extension. 6. Fold the rear flap of the cover up and place the cover on top of the wheel. The extension will come through the center hole in the cover. 7. Secure the cover with the larger wing nut. MAXX Model 2. Place the jack over the bolt (A) on the floor making sure it contacts the bolt as shown. Secure it with the bracket and nut provided. 5-71