2005 Chevrolet SSR Pickup Owner's Manual - Page 109

10. Once the bin has been situated properly, fully tighten the three wing nuts in the bottom of the bin and the D-ring on the side rail. 11. Install the locking lid on the storage bin. Each storage bin is delivered with two keys. If additional keys are needed, your dealer can create them using the key code imprinted on each key. 12. Repeat the above steps to install the other storage bin. To remove the storage bin(s), reverse the previous steps. Be sure to load items in the cargo area according to the proper load limits. See Loading Your Vehicle on page 4-29 for more information. 8. Insert one of the D-rings through the bracket and locking plate and loosely tighten it to the side rail. Be sure to use the D-rings supplied with the side-saddle storage system that have 0.3 inches (8 mm) studs. Using other D-rings will not work because the studs will be too long and the storage bins will not be secured properly. If you need additional D-rings and locking tabs, contact your dealer. 9. Loosely install the three wing nuts on the studs in the bottom of the storage bin. Convertible Top Operate the convertible top by pressing the convertible top switch located on the console switchbank. See Center Console Switchbank on page 3-18 for more information on location. 2-51