2005 Chevrolet SSR Pickup Owner's Manual - Page 164
2005 Chevrolet SSR Pickup Manual
Page 164 highlights
Battery Voltage Too Low This message will be displayed when the battery voltage is lower than normal and you try to raise or lower the convertible top. The charging system light may also be displayed on the instrument panel cluster. See Charging System Light on page 3-29 for more information. Press the select button to acknowledge the message and clear it from the DIC display. Check Oil Level If the oil level in the vehicle is low, this message will appear on the DIC. Check the oil level and add oil as necessary. See Engine Oil on page 5-13 for more information. Press the select button to acknowledge this message and clear it from the DIC display. Depress Brake This message will be displayed on the DIC when you try to raise or lower the convertible top without first pressing the brake pedal. The brake pedal must be pressed in order to operate the convertible top. See Convertible Top on page 2-51 for more information. Pressing the brake pedal will clear the message, or you can press the select button to acknowledge and clear the message from the DIC display. Cargo Cover Ajar This message will be displayed when trying to open or close the convertible top while the cargo cover is open. Make sure the cargo cover is fully closed before trying to open or close the convertible top. This message will clear itself from the DIC once the cargo cover is closed. Change Trans (Transmission) Fluid (Automatic Transmission Only) If your transmission fluid in your vehicle needs to be changed, this message will appear on the DIC. See Automatic Transmission Fluid on page 5-21 and Scheduled Maintenance on page 6-4 for more information. Driver Door Ajar This message will be displayed on the DIC and a chime will sound when the driver's door is not closed completely. Stop the vehicle, check the door for obstacles, and close the door again. Fully closing the driver's door will clear this message from the display, or you can press the select button to acknowledge the message and clear it from the DIC display. 3-46