2005 Chevrolet SSR Pickup Owner's Manual - Page 320

Tire Inflator Kit Storage The tire inflator kit is stored behind the driver's seat in your vehicle. To reinstall the kit after use, do the following: Air Compressor The air compressor included in the tire inflator kit was designed exclusively for your vehicle. After the sealant has been injected into the flat tire, use the air compressor to inflate the flat tire. {CAUTION: Storing the tire inflator kit or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store the tire inflator kit in the proper place. 1. Place the air compressor pump and accessories into the inflator kit case. 2. Move the driver's seat forward and tilt the seatback forward out of the way. 3. Place the inflator kit in its original position. 4. Place the cover over the tire inflator kit. 5. Hold the kit with the cover on against the back wall of the passenger compartment in the designated storage area as you perform the next step. 6. Reinstall the two nuts holding the tire inflator kit cover in place. 5-70 A. Inflating Hose B. Air Pressure Gage C. ON/OFF Switch D. Air Compressor Plug