2009 Chevrolet Traverse Owner's Manual - Page 227

Instrument Panel Using the Digit Store Command The digit store command allows a phone number to be stored by entering the digits individually. 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. Say "Digit Store". The system responds with "Please say the first digit to store" followed by a tone. 3. Say the first digit to be stored. The system will repeat back the digit it heard followed by a tone. Continue entering digits until the number to be stored is complete. 4. After the complete number has been entered, say "Store". The system responds with "Please say the name tag" followed by a tone. 5. Say a name tag for the phone number. The name tag is recorded and the system responds with "About to store . Does that sound OK?". 3-107 Using the Directory Command The directory command lists all of the name tags stored by the system. To use the directory command: 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. Say "Directory". The system responds with "Directory" and then plays back all of the stored name tags. When the list is complete, the system returns to the main menu. • If the name tag does not sound correct, say "No" and repeat Step 5. • If the name tag sounds correct, say "Yes" and the name tag is stored. After the number is stored the system returns to the main menu. Deleting Name Tags The system uses the following commands to delete name tags: • If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. • Delete • Delete all name tags • To hear all of the numbers recognized by the system, say "Verify" at any time and the system will repeat them.