2009 Chevrolet Traverse Owner's Manual - Page 9

Seats and Restraint System 1-5 Power Lumbar If the seats have power lumbar, the controls used to operate this feature are located on the outboard side of the seats. See "Power Lumbar" under Power Seats on page 1-4 for more information. To increase or decrease lumbar support, press and hold the front or rear of the control (C). Release the control when the seatback reaches the desired level of lumbar support. The lumbar support may need to be adjusted when changing the seating position. Heated Seats On vehicles with heated front seats, the controls are located on the center console. To operate the heated seats the engine must be running. I (Heated Seatback): Press to turn on the heated seatback. See "Remote Vehicle Start" under Remote Keyless Entry (RKE) System Operation on page 2-4. When the ignition is turned on, the heated seat feature will turn off. To turn the heated seat feature back on, press the desired button. J (Heated Seat and Seatback): Press to turn on or off the heated seat and seatback. The light on the button will come on to indicate that the feature is on. Each time the button is pressed, the temperature settings change from high, to medium, to low, to off. Indicator lights above the button will show the level of heat selected: three for high, two for medium, and one for low. The passenger seat may take longer to heat up. If the vehicle has remote vehicle start and is started using the remote keyless entry transmitter, the front heated seats will be turned on to the high setting if it is cold outside. Heated and Cooled Seats If the front seats have the heated and cooled seat feature, the buttons used to control this feature are located on the front doors near the door handle. H (Cooled Seat): To cool the entire seat, press the button with the cooled seat symbol. This symbol will appear on the climate control display to indicate that the feature is on. Press the button to cycle through the temperature settings of high, medium, and low and to turn the cooled seat off. Indicator bars next to the symbol designate the level of cooling selected: three for high, two for medium, and one for low.