2010 Chevrolet Cobalt Owner's Manual - Page 155

Ending Cruise Control There are two ways to end cruise control: . The exterior lamp switch has the following four positions: 2 (Headlamps) : Turns on the headlamps, parking lamps, and taillamps. ; (Parking Lamps) : Turns on the parking lamps and taillamps only. AUTO (Automatic Headlamp System) : Automatically turns on the Daytime Running Lamps (DRL) during daytime, and the headlamps, parking lamps, and taillamps at night. This position must be selected in order for the Wiper Activated Headlamps to be activated. See Wiper Activated Headlamps on page 4‑10. P (Off/On) : When operating in AUTO, a momentary turn of the switch to Off/On will turn the Automatic Headlamp System off or back on. For vehicles first sold in Canada, the automatic transmission must be in P (Park) or the manual transmission must have the park brake set, before the Automatic Headlamp System can be turned off. Step lightly on the brake pedal or the clutch pedal if the vehicle has a manual transmission. This will only end the current cruise control session. Press . J to turn the system completely off. Erasing Speed Memory The cruise control set speed memory is erased when the cruise control or the ignition is turned off. Headlamps The lever on the left side of the steering column operates the exterior lamps. 4-9