2010 Chevrolet Traverse Owner's Manual - Page 271

Driving and Operating 9-15 Starting and Operating New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . . If you have all-wheel drive, keep your speed at 88 km/h (55 mph) or less for the first 805 km (500 miles). Do not drive at any one constant speed, fast or slow, for the first 805 km (500 miles). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle. Avoid making hard stops for the first 322 km (200 miles) or so. During this time the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings. Do not tow a trailer during break-in. See Driving Characteristics and Towing Tips on page 9‑44 for the trailer towing capabilities of your vehicle and more information. Ignition Positions . . The ignition switch has four different positions. In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and the brake pedal must be applied. Following break-in, engine speed and load can be gradually increased.