2013 Chevrolet Silverado 2500 HD Crew Cab Owner Manual - Page 160

5-30 Instruments and Controls Trip/Fuel Menu Items (with DIC Buttons) The trip odometer can be reset to zero by pressing the set/reset button while the trip odometer is displayed. You can also reset the trip odometer while it is displayed by pressing and holding the trip odometer reset stem. The trip odometer has a feature called the retro-active reset. This can be used to set the trip odometer to the number of miles (kilometers) driven since the ignition was last turned on. This can be used if the trip odometer is not reset at the beginning of the trip. To use the retro-active reset feature, press and hold the set/reset button for at least four seconds. The trip odometer will display the number of kilometers (km) or miles driven since the ignition was last turned on and the vehicle was moving. Once the vehicle begins moving, the trip odometer will accumulate mileage. For example, if the vehicle was driven 8 km (5 miles) before it is started again, and then the retro-active reset feature is The temperature will be shown in °C or °F depending on the units selected. Press this button to display the oil life, units, tire pressure readings for vehicles with the Tire Pressure Monitor System (TPMS), trailer brake gain and output information for vehicles with the Integrated Trailer Brake Control (ITBC) system, engine hours, compass zone setting, and compass recalibration. T (Vehicle Information): 3 (Trip/Fuel): Odometer Press this button to scroll through the following menu items: Press the trip/fuel button until ODOMETER displays. This display shows the distance the vehicle has been driven in either kilometers (km) or miles. Pressing the trip odometer reset stem will also display the odometer. To switch between metric and English measurements, see "Units" later in this section. Trip Odometer Press the trip/fuel button until TRIP displays. This display shows the current distance traveled in either kilometers (km) or miles since the last reset for the trip odometer. Pressing the trip odometer reset stem will also display the trip odometer. U (Customization): Press this button to customize the feature settings on the vehicle. See Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information. Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC. V (Set/Reset):