2013 Chevrolet Silverado 2500 HD Crew Cab Owner Manual - Page 335

Driving and Operating 9-67 When the System Does Not Seem To Work Properly The RVC system might not work properly or display a clear image if: . The RVC is turned off. See "Turning the RVC System On or Off" earlier in this section. It is dark. The sun or the beam of headlamps is shining directly into the camera lens. Ice, snow, mud, or anything else builds up on the camera lens. Clean the lens, rinse it with water, and wipe it with a soft cloth. The back of the vehicle is in an accident, the position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer. . . A. Chassis harness connector B. Release tab C. Camera connector 3. Plug the two exposed chassis harness connectors together to prevent contamination. A. Chassis harness connector B. Release tab 4. Feed the wiring harness through the pickup box, then plug the camera connectors together to prevent contamination. 5. Remove the tailgate. See Tailgate on page 2‑9 for more information. 6. Reinstall the license plate. Reverse this procedure to reinstall the RVC and make sure the grommet and connection are secure. . .