2014 Chevrolet Sonic Owner Manual - Page 282
2014 Chevrolet Sonic Manual
Page 282 highlights
10-32 Vehicle Care 1. Bulb Socket 2. Bulb 3. Lamp Assembly To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down to remove it. 3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 4. Pull the bulb (2) straight out of the bulb socket (1). 5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. 6. Turn the lamp assembly into the lamp assembly opening engaging the clip side first. 7. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Replacement Bulbs Exterior Lamp Back-Up Lamp Front Fog Lamp Front Parking/Turn Signal Lamp High-Beam Headlamp License Plate Lamp Low-Beam Headlamp Rear Sidemarker Lamp Rear Turn Signal Lamp Stop Lamp/Taillamp Bulb Number 921 H8 7444NA 9005LL W5W LL H11 194LL 4157NAK 7444LL Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. For replacement bulbs not listed here, contact your dealer.