2015 Chevrolet City Express Owner Manual - Page 170
2015 Chevrolet City Express Manual
Page 170 highlights
Driving and Operating COAST/SET: Press briefly to set the speed and activate cruise control, or press and hold to decelerate. If cruise control is already active, use to decrease vehicle speed. CANCEL: Press to disengage cruise control without erasing the set speed from memory. Setting Cruise Control If the CRUISE ON/OFF button is on when not in use, the COAST/SET or ACCEL/RES button could get pressed and go into cruise when not desired. Keep the CRUISE ON/OFF button off when cruise is not being used. 1. Press CRUISE ON/OFF to turn the cruise system on. 2. Get up to the desired speed. 3. Press and release COAST/SET. The desired set speed briefly appears in the instrument cluster. . 9-29 4. Remove your foot from the accelerator. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 48 km/h (30 mph) or more, briefly press ACCEL/RES. The vehicle returns to the previous set speed. Increasing Speed While Using Cruise Control If the cruise control system is already activated: . Reducing Speed While Using Cruise Control If the cruise control system is already activated: . Press and hold COAST/SET until the desired lower speed is reached, then release it. To decrease the vehicle speed in small increments, briefly press COAST/SET. For each press, the vehicle goes about 1.6 km/h (1 mph) slower. . Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed. While pressing the accelerator pedal or shortly following the release to override cruise control, briefly pressing COAST/SET will result in cruise set to the current vehicle speed. Press and hold ACCEL/RES until the desired speed is reached, then release it. To increase vehicle speed in small increments, briefly press ACCEL/RES. For each press, the vehicle goes about 1.6 km/h (1 mph) faster.