2015 Chevrolet Spark Owner Manual - Page 215

9-30 Driving and Operating RES/+ (Resume/Accelerate): If there is a set speed in memory, press briefly to resume to that speed or press and hold to accelerate. If cruise control is already active, use to increase vehicle speed. SET/− (Set/Coast): Press briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed. 1. Press I to turn the cruise system on. 2. Get up to the desired speed. 3. Press and release SET/−. 4. Remove foot from the accelerator. The cruise control indicator on the instrument cluster turns green after cruise control has been set to the desired speed. See Instrument Cluster on page 5-8. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied or [ is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle reaches about 40 km/h (25 mph) or more, press RES/+ briefly. The vehicle returns to the previous set speed. using cruise control, the cruise control will automatically disengage. See Traction Control/Electronic Stability Control on page 9-27. When road conditions allow you to safely use it again, cruise control can be turned back on. If the brakes are applied, the cruise control disengages. [ (Cancel): Press to disengage cruise control without erasing the set speed from memory. Setting Cruise Control If the I button is on when not in use, SET/− or RES/+ could get pressed and go into cruise when not desired. Keep the I button off when cruise is not being used. I (On/Off): Press to turn the cruise control system on and off. A white indicator comes on in the instrument cluster. The cruise control light on the instrument panel cluster turns green after the cruise control has been set to the desired speed.