2015 Chevrolet Spark Owner Manual - Page 217

9-32 Driving and Operating Ending Cruise Control There are five ways to end cruise control: . Driver Assistance Systems Rear Vision Camera (RVC) If equipped, the RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning (Continued) or vehicle damage. Always check behind and around the vehicle before backing. Step lightly on the brake pedal (manual and automatic transmissions). Press the clutch pedal to the floor (manual transmissions). Shift the transmission to N (Neutral). Press . How the System Works When the vehicle is shifted into R (Reverse), the image of the area behind the vehicle appears in the radio screen. The previous screen displays when the vehicle is shifted out of R (Reverse) after a short delay. To see the previous screen sooner, do one of the following: . . . . [. { Warning The RVC system does not display children, pedestrians, bicyclists, crossing traffic, animals, or any other object located outside the camera's field of view, below the bumper, or under the vehicle. Perceived distances may be different from actual distances. Do not back the vehicle using only the RVC screen. Failure to use proper care before backing may result in injury, death, (Continued) To turn off the cruise control, press I. Erasing Speed Memory The cruise control set speed is erased from memory if I is pressed or if the ignition is turned off. Press a button on the infotainment system. Shift into P (Park). .