2005 Chrysler Pacifica Owner Manual Touring - Page 267
2005 Chrysler Pacifica Manual
Page 267 highlights
WHAT TO DO IN EMERGENCIES 267 • Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking Instructions 1. Remove the spare wheel, scissors jack and jack-handle from stowage. 2. Carefully pry off the wheel center cap using the tip of the jack handle. 3. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 4. There are two jack engagement locations on each side of the body - see illustration. 5. These locations are on the sill flange on the underside of the body. The jack is to be located, engaging the flanges, 20 cm (8 inches) inward from the edge of the wheel opening closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described 6