2006 Chrysler 300 Owner Manual - Page 154
2006 Chrysler 300 Manual
Page 154 highlights
154 UNDERSTANDING YOUR INSTRUMENT PANEL • When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of ЉLOW FUEL.Љ This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ЉLOW FUELЉ text and a new DTE value will display. • Trip A Shows the total distance travelled for trip A since the last reset. • Trip B Shows the total distance travelled for trip B since the last reset. • Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or START position. • Display Units of Measure in: To make your selection, press and release the FUNCTION SELECT button until "US" or "METRIC" appears. To Reset The Display Reset will only occur while a resettable function is being displayed. Press and release the FUNCTION SELECT button once to clear the resettable function being displayed. To reset all resettable functions, press and release the FUNCTION SELECT button a second time within 3 seconds of resetting the currently displayed function (>Reset ALL will display during this 3 second window). Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight compass readings and the outside temperature. Automatic Compass Calibration This compass is self calibrating, which eliminates the need to manually set the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL" until the compass is calibrated. You may also calibrate the compass by completing one or more 360° turns (in an area free from large metal or metallic objects) until the "CAL" message displayed in the EVIC turns off. The compass will now function normally.