2008 Chrysler Aspen Owner Manual - Page 364

STARTING AND OPERATING 363 5. Shift the automatic transmission to NEUTRAL. 6. Using the point of a ballpoint pen or similar object, depress the recessed transfer case NEUTRAL button for one second. 7. After the NEUTRAL indicator light turns off, release the NEUTRAL button. 8. After the NEUTRAL button has been released, the transfer case will shift to the position identified by the selector switch. 9. Shift the automatic transmission into PARK. 10. Start the engine. 11. Shift the automatic transmission into DRIVE. NOTE: Steps 1 through 5 are requirements that must be met prior to depressing the NEUTRAL selection button, and must continue to be met until one second elapses and the shift has been completed. If any of these requirements are not met prior to depressing the NEUTRAL button or are no longer met during the one second time, then all of the position indicator lights will flash continuously until all requirements are met or until the NEUTRAL button is released. NOTE: The ignition key must be ON for a shift to take place and for the position indicator lights to be operable. If the key is not ON, the shift will not take place and no position indicator lights will be on or flashing. NOTE: A flashing NEUTRAL position indicator light indicates that shift requirements have not been met. 5