2008 Chrysler Aspen Owner Manual - Page 53

52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE or START position. DaimlerChrysler does not recommend deactivating the Enhanced Warning System (BeltAlert௡). 1. Turn the ignition switch to the OFF position and buckle the driver's seat belt. DO NOT start the engine or press the TRIP RESET button. 2. Turn the ignition switch to the ON position and wait for the seat belt Warning Light to turn off. If during this time, the seat belt becomes unbuckled or the engine is cranked or started, programming will be cancelled. 3. Unbuckle and then re-buckle the driver's seat belt three times within 10 seconds, ending with the seat belt buckled. A chime will sound immediately (once the feature has toggled). If during this time the ignition switch is turned out of the ON position or the timer expires, programming mode will be cancelled. 4. Programming mode will be cancelled after the feature has toggled with the seat belt still buckled or if the ignition switch is turned to the LOCK position or 10 seconds after the feature has toggled. The Enhanced Warning System (BeltAlert௡) can be reactivated by repeating this procedure. NOTE: Although the Enhanced Warning System (BeltAlert௡) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver's seat belt remains unbuckled. Seat Belts and Pregnant Women We recommend that pregnant women use seat belts throughout their pregnancies. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug against the hips as possible.