2010 Chrysler PT Cruiser User Guide - Page 17

OPERATING YOUR VEHICLE TURN SIGNAL/LIGHTS LEVER Headlights/Parking Lights • Rotate the end of the lever to the first detent for parking lights second detent for headlights . and to the Instrument Panel Dimmer • Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. • Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the parking lights or headlights are on. • Rotate the center portion of the lever upward to the next detent position to brighten the odometer and radio controls when the parking lights or headlights are on. • Rotate the center portion of the lever upward to the last detent to turn on the interior lighting. Flash To Pass • Pull the lever toward you to activate the high beams. The high beams will remain on until the lever is released. High Beam Operation • Push the lever forward to activate the high beams. NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent headlight glare and as a courtesy to other motorists. Fog Lights • Turn on the parking lights or low beam headlights and pull out the end of the lever. 15