2010 Chrysler Town & Country User Guide - Page 35

OPERATING YOUR VEHICLE To Remove The Seats • Remove any obstructions from the floor behind the seat, and stow the third row seat. • Pull up on the release bar located at the bottom front edge of the swivel seat. • From behind the seat, lift up on the rear of the seat cushion while pulling the seat in a rearward direction. • Remove the seat from the vehicle through the liftgate. Rollers are part of the seat frame and will ease the removal process. • Lower the release handle located at the bottom front edge of the seat. THIRD ROW POWER RECLINER • The power recline feature, located on the side of the seat cushion, adjusts the seatback angle forward/rearward for occupant comfort. Third Row Power Seat Switch • A one-touch power folding seat switch is located in the left rear trim panel as part of a switch bank. • Left and right third row seats can be folded individually or together. The third row power folding seats adjust to multiple positions. • The switch is only functional when the liftgate is open and the vehicle is in PARK. NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints before attempting to fold/stow the power third row seats. • To abort seat operation while the seat is in motion, press a different seat position selector switch to stop the seat. Once the seat stops moving, then the desired position can be selected. • The third row power seat system includes obstacle detection for safe operation. When the system detects an obstacle, the motors will stop and reverse the motion a short distance to move the seat away from the obstacle. Should this occur, remove the obstacle and press the button again for the desired position. • Refer to your Owner's Manual on the DVD for manual third row seat folding instructions. 33