2011 Chrysler Town & Country User Guide - Page 22

OPERATING YOUR VEHICLE TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER Turn Signal/Lane Change Assist • Tap the lever up or down once and the turn signal (right or left) will flash three times and automatically turn off. • Vehicles equipped with Blind Spot Monitoring may be programmed to add a visual alert when signaling a lane change; refer to your Owner's Manual on the DVD for operation. Front Wipers Intermittent, Low And High Operation • Rotate the end of the lever to the first detent position for one of five intermittent settings, the second detent for low wiper operation and the third detent for high wiper operation. Rain Sensing Wipers • This feature senses moisture on the vehicle's windshield and automatically activates the wipers for the driver when the switch is in the intermittent positions. Refer to Programmable Features in Getting Started for further details. Mist • Push the end of the lever inward to the first detent when a single wipe is desired. NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Washer Operation • Push the end of the lever inward to the second detent and hold for as long as spray is desired. Rear Wiper • Rotate the center portion of the lever forward to the first detent for rear wiper operation. Rear Washer • Rotate the center portion of the lever past the first detent to activate the rear washer. 20