2011 Chrysler Town & Country User Guide - Page 23
2011 Chrysler Town & Country Manual
Page 23 highlights
OPERATING YOUR VEHICLE High Beams • Push the lever away from you to activate the high beams. • A high beam symbol will illuminate in the cluster to indicate the high beams are on. NOTE: For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight glare and as a courtesy to other motorists. Flash To Pass • Pull the lever toward you to activate the high beams. The high beams will remain on until the lever is released. HEADLIGHT SWITCH AND HALO LIGHT SWITCH Automatic Headlights/Parking Lights/ Headlights • Rotate the headlight switch, located on the instrument panel to the left of the steering wheel, to the first detent for parking and to the second detent for lights . headlights • With the parking lights or low beam headlights on, push the headlight switch once for fog lights. • Rotate the headlight switch to "AUTO" for AUTO headlights. • When set to AUTO, the system automatically turns the headlights on or off based on ambient light levels. SmartBeams™ • This system automatically controls the use of the headlight high beams. Refer to Programmable Features in Electronics for further details. Instrument Panel Dimmer • Rotate the dimmer control to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. • Rotate the dimmer control up to increase the brightness of the instrument panel when the parking lights or headlights are on. • Rotate the dimmer control up to the next detent position to fully brighten the odometer and radio when the parking lights or headlights are on. Refer to your Media Center/Radio User Manual on the DVD for display dimming. • Rotate the dimmer control up to the last detent position to turn on the interior lighting. 21