2009 Dodge Caliber Owner Manual SRT4 - Page 314

312 WHAT TO DO IN EMERGENCIES Using the Air Pump Power Button Push and release the button (3) once to turn ON the TIREFIT kit. Push and release the button (3) again to turn OFF the TIREFIT kit. Sealing a Tire with TIREFIT (A) Whenever You Stop to Use TIREFIT: 1. Turn ON the vehicle's hazard warning flashers. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. This will allow the TIREFIT Hoses (6) and (7) to reach the valve stem and keep the TIREFIT kit flat on the ground. This will provide the best positioning of the kit when injecting the sealant into the deflated tire and running the air pump. Move the vehicle as necessary to place the valve stem in this position before proceeding. 3. Place the transmission in PARK (auto transmission) or in Gear (manual transmission) and turn OFF the ignition. 4. Set the parking brake. (B) Setting Up to Use TIREFIT: 1. Remove the gloves from the Accessory Storage Compartment (8) and place them on your hands. 2. Turn the Mode Select knob (4) to the Sealant/Air Mode position. 3. Uncoil the Clear Sealant Hose (7) and then remove the Yellow Cap from the fitting at the end of the hose. 4. Place the TIREFIT kit flat on the ground next to the deflated tire.