2009 Dodge Caliber Owner Manual SRT4 - Page 315

WHAT TO DO IN EMERGENCIES 313 5. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (7) onto the valve stem. 6. Uncoil the Power Plug and Cable (5) and then insert the plug into the vehicle's power outlet. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire. (C) Injecting TIREFIT Sealant into the deflated tire: 1. Always start the engine before turning ON the TIREFIT kit. 2. After pressing the Air Pump Power Button (3), the air pump should start to inflate the tire and the sealant (white fluid) will flow from the Sealant Bottle (1) through the Sealant Hose (7) and into the tire. NOTE: Some sealant may leak out through the puncture in the tire. 3. If the sealant Does Not Flow Through the Clear Sealant Hose (7): • Press the Air Pump Power Button (3) to turn OFF the TIREFIT kit. Disconnect the Clear Sealant Hose (7) from the valve stem. Make sure the valve stem is free of debris. Reconnect the Clear Sealant Hose (7) to the valve stem. Press the Air Pump Power Button (3) to turn ON the TIREFIT kit. • Turn the Mode Select knob to the Sealant/Air Mode. • Connect the Power Plug (5) to a different power outlet in your vehicle or another vehicle, if available. Make sure the engine is running before turning ON the TIREFIT kit. • The Sealant Bottle (1) may be empty due to previous use. Call for assistance. 6