2009 Dodge Dakota Owner Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Horn Chirp Programming The horn chirp feature is shipped from the assembly plant activated. If desired, this feature can be disabled by using the following procedure: 1. Press and hold the LOCK button on the RKE transmitter. 2. After holding the LOCK button for four seconds, also press the PANIC button within six seconds. A single chime will sound to indicate that this feature has changed. 3. Release both buttons at the same time. 4. To reactivate this feature, repeat the above steps. 5. Test the horn chirp feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the ignition in the OFF position and the key removed. NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm System. 6. If the desired programming was not achieved, or to reactivate this feature, repeat the above steps. Flash Lamps With Lock Programming 1. Press and hold the UNLOCK button on the RKE transmitter. 2. After holding the UNLOCK button for four seconds, also press the LOCK button within six seconds. A single chime will sound to indicate that this feature has changed. 3. Release both buttons at the same time. 2