2009 Dodge Dakota Owner Manual - Page 33

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 4. Within 10 seconds, cycle the key from the LOCK position to the ON position and back to LOCK position, a minimum of four times; ending in the LOCK position. (Do not start the engine.) 5. Within 30 seconds, press the driver's door LOCK switch in the LOCK direction. 6. A single chime will be heard to indicate the feature has been disabled. 7. To reactivate this feature, repeat the above Steps. 8. If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the above procedure. Auto Unlock On Exit Feature - If Equipped This feature unlocks all of the doors of the vehicle when any door is opened. This will occur only after the vehicle has been shifted into the PARK position after the vehicle has been driven (shifted out of PARK and the doors closed). Auto Unlock Feature Programming The Customer Programming sequence to disable or enable Auto Unlock: 1. Enter your vehicle and close all the doors. 2. Fasten your seat belt. (Fastening the seat belt will cancel any chiming that may be confusing during this programming procedure.) 3. Insert the key into the ignition. 4. Within 15 seconds, cycle the key from the LOCK position to the ON position and back to LOCK position, a minimum of four times; ending in the LOCK position. (Do not start the engine.) 2