2009 Dodge Durango Owner Manual - Page 71

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 to use a locking clip. The ALR will make a ratcheting noise if you extract the entire belt from the retractor and then allow the belt to retract into the retractor. For additional information on ALR, refer to "Automatic Locking Mode" in this section. To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate into the buckle. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. 2 Second Row Seat Tether Anchors Child Restraints in Third Row Seating (If Equipped) For vehicles equipped with third row split bench (60/40) seating, the tether strap anchorage is located on the