2011 Dodge Dakota Crew Cab Owner Manual - Page 181
2011 Dodge Dakota Crew Cab Manual
Page 181 highlights
180 UNDERSTANDING YOUR INSTRUMENT PANEL threshold. Further overheating will cause the tempera5. High Beam Indicator The high beam indicator will illuminate if the ture gauge to pass H (Hot), the indicator will continuously flash and a continuous chime will occur until the headlights are on high beam. engine is allowed to cool. 6. Seat Belt Reminder Light When the ignition switch is first turned to ON/ CAUTION! RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if Driving with a hot engine cooling system could the driver's seat belt is unbuckled, a chime will sound. damage your vehicle. If the temperature light is on, After the bulb check or when driving, if the driver seat safely pull over and stop the vehicle. Idle the vehicle belt remains unbuckled, the Seat Belt Warning Light will in neutral with the air conditioner turned off until flash or remain on continuously. Refer to "Occupant the light turns off. If the light remains on, turn the Restraints" in "Things To Know Before Starting Your engine off immediately, and call for service. Vehicle" for further information. 7. Engine Temperature Warning Light This light warns of an overheated engine condition. As temperatures rise and the gauge approaches H (Hot), this indicator will illuminate and a single chime will sound after reaching a set