2011 Dodge Dakota Crew Cab Owner Manual - Page 24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm System. 4. Test the Flash Lamps With Lock feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the ignition in the OFF position and the key removed. 2 NOTE: Pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle 6. If the desired programming was not achieved, or to Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the reactivate this feature, repeat the above steps. UNLOCK button to deactivate the Vehicle Security Flash Lamps With Lock Programming Alarm System. 1. Press and hold the UNLOCK button on the RKE 5. If the desired programming was not achieved, or to transmitter. reactivate this feature, repeat the above steps. 2. Continue to hold the UNLOCK button for at least Using The Panic Alarm 4 seconds, but not longer than 10 seconds, then press and To activate the Panic mode while the ignition is OFF, hold the LOCK button. A single chime will sound to press and release the PANIC button on the RKE transindicate that this feature has changed. mitter once. When the Panic mode is activated, the interior lights will illuminate, the headlights and parking 3. Release both buttons at the same time. lights will flash, and the horn will sound.