2011 Dodge Nitro Owner Manual - Page 155
2011 Dodge Nitro Manual
Page 155 highlights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To change the brightness of the instrument panel lights, Lights-On Reminder rotate the center portion of the multifunction lever up or If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound when the driver's door down. is opened. NOTE: If the driver's door is left open, and the headlights or parking lights are left on, a chime will sound. High/Low Beam Switch Push the multifunction lever away from you to switch Daytime Running Lights - If Equipped the headlights to high beams. Pull the lever toward you The high beam headlights will turn on as Daytime to switch the headlights back to low beams. Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the Flash-to-Pass headlight switch is off, the parking brake is released and You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steerthe shift lever is in any position except PARK. ing wheel. This will turn on the high beam headlights NOTE: The Daytime Running Lights will turn off until the lever is released. automatically when a turn signal is in operation and turn Front Fog Lights - If Equipped on again when the turn signal is not operating. The front fog light switch is in the multifunction lever. To activate the front fog lights, turn on the parking or low beam headlights and pull out the end of the lever.