1997 Ford Mustang Owner Guide 1st Printing - Page 224

Checking Hoses Inspect all engine and heater system hoses and hose connections for deterioration, leaks, and loose hose clamps as specified in the Maintenance Schedule booklet. Repair or replace with Motorcraft hoses or equivalent as necessary. Adding Engine Coolant R WARNING Do not put engine coolant in the container for the windshield washer fluid. If sprayed to clean the glass, engine coolant or antifreeze could make it difficult to see through the windshield. R WARNING Never remove the radiator cap or vent plug while the engine is running or hot. Follow these steps to avoid personal injury that can be caused by escaping steam or engine coolant. 1. Before you remove the cap, turn the engine off and let it cool. Even when the engine is cool, be careful when you remove the radiator cap or vent plug. When the engine is cool, wrap a thick cloth around the cap and turn it slowly counterclockwise to unscrew. Step back while the pressure releases. When you are sure that all the pressure has been released, use the cloth to press the cap down, turn it counterclockwise, and remove it. 2. 3. 4. 226