1998 Ford Expedition Owner Guide 1st Printing - Page 191

Maintenance and care 1. Remove the four screws that secure the high-mount brakelamp lens. 2. Carefully remove the lens. 3. Each of the three bulbs may be removed with a 1⁄4 turn counterclockwise and a careful pull. 4. Replace the bulbs as needed and replace the high-mount brakelamp lens. Replacing tail lamp/backup lamp bulbs The tail lamp/backup lamp assemblies are located in the same portion of the vehicle rear, one just below the other. Follow the same steps to replace either bulb: 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws at the top of the lens. 3. Carefully pop the lens off and to the right (it may be necessary to use a screwdriver to remove the lens). 4. Twist the connector 1⁄4 turn counterclockwise and pull it out for replacement. 5. Pull the bulb straight out of the recess and replace it. 6. Replace the lens and secure the two screws. 191